Nov. 18, 2009 — Property manager Michael J. Wolfe (second from right in photo) of Midboro Management is a member of the Green Building Initiative Committee of the Service Employees International Union Local 32BJ. Along with 12 supers from buildings he manages, Wolfe is himself taking the free weekly class in environmental training to lower energy use and cost. This is the third of five weekly reports.
Day 3 – November 5, 2009: The class was a little tired today as many of the supers stayed up to watch the Yankees win their 27th World Series. I'm happy for New York, though it's a little painful for this Mets fan. That said, today we visited a building to conduct a hands-on seminar.
One of the first things we learned about is the surprising amount of health risk associated with poor indoor air quality (IAQ). Cockroaches, dust mites, rodents, mold dust and pets with fur can all contributed to asthma, and IAQ has also been linked to allergies and certain cancers. It's important for building staff to keep our common areas clean and to advise residents to keep their apartments properly ventilated.
The primary strategies for improving IAQ are regularly cleaning your vent ducts and filters; using natural ventilation such as windows and louvers; and checking "material safety data sheets" (MSDS) and container labels for volatile organic compounds (VOC), measured in grams per liter. These range from minimal (0.29 percent or less) and low (0.3 to 7.99 percent) to very high (50 percent or more).
Some of the indoor pollutants and allergens of which you and your staff should be aware are:
In terms of what is called Integrated Pest Management — bedbugs are a major topic these days — it's important to keep common areas clean. Limit or eliminate carpets there, and use a good vacuum. Fill cracks to stop air migration between apartments.
Boric acid is a relatively safe. non-toxic and effective rodenticide. A professional exterminator should be treating buildings monthly. Building staff should make sure there are no holes around the exterior of the building that could permit rodents to enter.
Water Conservation
Water meters and your water bills are measured in hundred cubic foot (HCF) units. One cubic foot equals 7.48 gallons; one HCF equals 748 gallons. The average person using standard fixtures and appliance uses 72.5 gallons per day, as opposed tom the 36 to 42 per day of someone using high-efficiency fixtures/appliances. Low-flow toilets use 1.6 gallons per flush or less. Faucet aerators can save one gallon per minute.
The New York City Department of Environmental Protection reports that 14% of our water costs come from leaks. Emphasize to your residents that they report any leak, regardless of how small it may be. Read meters often to allow you to detect leaks and install submitters to pinpoint water and energy savings. Toilet leaks are the largest single source of leaks. If you hear water running, some of the internal parts require replacement. It could be as simple as a flapper, which is very inexpensive.
Make sure your heating system and boiler are not losing water. That indicates a leak in the system. Introducing fresh water is not only costly, but has an adverse affect on your boiler. Clean sidewalks with a water broom or a water sweeper, which significantly decreases water use.